Yeast Pitch Rate Calculator

Work out how much yeast to pitch from your batch size and original gravity, using Brewers Association pitch rates — with dry and liquid yeast pack equivalents.

1–200 L

0–30 °P

How to use this calculator

  1. Enter your batch volume in litres (1–200 L).
  2. Enter the original gravity in degrees Plato (0–30 °P). Refractometer readings in °Bx are close enough to use directly; if you measured in specific gravity, convert with theBrix / Plato / SG converter first.
  3. Choose Ale or Lager. Lager yeast ferments cold and sluggish, so it needs twice the cells.
  4. The result shows the total viable cells your batch needs, plus how many dry-yeast packs (11.5 g) or liquid-yeast packs that works out to, rounded up to the nearest half pack.

Formula

The calculator follows the Brewers Association pitch-rate guidelines, the reference homebrewers worldwide use:

Cells needed = pitch rate × volume × gravityAle: 0.75 million cells / mL / °P · Lager: 1.50 million cells / mL / °P

Pack equivalents use conservative cell counts: an 11.5 g dry-yeast pack is counted at 200 billion cells (about 20 billion per gram), and a fresh liquid-yeast pack at 100 billion cells. Pack numbers always roundup to the nearest half pack — it is better to over-pitch slightly than to round down below the target.

Example

A 20-litre batch at 12 °P fermented as an ale needs 0.75 × 20 × 12 = 180 billion cells. That is 0.9 dry-yeast packs, rounded up to 1 pack, or 1.8 liquid-yeast packs, rounded up to2 packs. The same wort as a lager needs double — 360 billion cells — which is2 dry packs or 4 liquid packs.

Accuracy & limitations

  • The pitch rates come from the Brewers Association's published guidelines and are the standard reference for homebrewers, but they are guidelines, not lab measurements: real cell counts vary with the yeast strain, the pack's age and storage, and how the wort was oxygenated.
  • Accepted ranges: 1–200 litres and 0–30 °P. Very strong worts above about 1.075 SG deserve a higher rate (see the FAQ).
  • This calculator does not size yeast starters — if you propagate your own yeast, use a starter-size calculator alongside.

FAQ

What happens if I pitch too little yeast?

Under-pitching is one of the most common homebrewing mistakes. Too few cells means a long lag phase, during which wild yeast and bacteria get a head start. Stressed yeast throws excess esters, diacetyl, acetaldehyde and fusel alcohols, and the fermentation may stall before reaching final gravity. Lagers and strong worts are the least forgiving — that is why the calculator doubles the pitch rate for lagers.

Does dry yeast need to be rehydrated?

Manufacturers such as Fermentis and Lallemand recommend rehydrating dry yeast in sterile water at the temperature stated on the packet (usually around 25–30 °C): sprinkle, rest, stir gently, then pitch. Sprinkling dry yeast directly onto wort kills a share of the cells through osmotic shock. If you pitch dry yeast without rehydrating, consider pitching a little more than the calculator suggests — or simply follow the packet instructions.

Do high-gravity beers need more yeast?

Yes. The more sugar the yeast must ferment, the more cells the job needs. The Brewers Association suggests 1.0 million cells/mL/°P for ales above about 1.075 original gravity (roughly 18–19 °P) — about a third more than the standard ale rate. This calculator uses the standard rates (0.75 for ale, 1.5 for lager); for very strong worts, pitching at the lager rate gives a safe margin, and many brewers make a starter instead of opening extra packs.

Which cell count is more trustworthy — dry or liquid yeast?

Dry yeast counts are the more predictable of the two. The per-gram cell count printed by the manufacturer stays stable through the whole shelf life when the pack is sealed and stored cool. Liquid yeast starts near 100 billion cells when fresh but loses viability with age — roughly a fifth of the cells per month is a common estimate — so an old liquid pack may hold far fewer cells than the label implies. Always check the production date on liquid yeast; for dry yeast, the pack count is what it says.