Sugar Wash Calculator – SG & Potential ABV

Work out how much water to add to a weighed amount of sugar to hit a target wash volume — plus the starting gravity and potential alcohol that mixture will ferment to.

White sugar, weighed before dissolving

Finished wash volume, sugar included

How to use this calculator

  1. Weigh your sugar on a scale — do not measure it by the cup; a cup of granulated sugar varies by 20 % or more.
  2. Enter the sugar weight and the total finished volume you want, fermenter headspace included in your planning.
  3. Add the water shown, a little at a time, stirring until the sugar fully dissolves. Warm — not hot — water dissolves sugar much faster.
  4. Check the dissolved wash with a hydrometer or refractometer against the SG and Brix shown, and top up or dilute to match.
  5. Cool to pitching temperature, add yeast nutrient and yeast, and ferment as you would any wash.

What the inputs mean

Sugar amount is the weight of plain white sugar (sucrose) you plan to dissolve. Weight is what matters: the gravity of the wash is set by how many kilograms of sugar end up in it, and volume measures of dry sugar are too inconsistent to calculate from.

Total batch volume is the finished volume of the wash, including the space the dissolved sugar takes up. This is the step people get wrong: dissolved sugar occupies about 0.625 litres per kilogram, so 6 kg of sugar stirred into 25 litres of water does not make a 25-litre wash — it makes about 28.75 litres of a weaker one. This calculator works backwards from the volume you actually want.

Formulas

Water to add — the sugar's own dissolved volume comes off the batch first:

Water (L) = total volume − 0.625 × sugar (kg)

Starting Brix — water weighs 1 kg per litre, so the wash mass is sugar plus water:

Brix = 100 × sugar (kg) ÷ (sugar + water, kg)

Specific gravity comes from Brix with the standard ASBC polynomial used across this site. Potential alcohol uses the gravity-points factor, shown for two finishing gravities:

Potential ABV = (SG − FG) × 131.25

Example

A wash of 6 kg of sugar made up to 25 litres total: the sugar occupies 3.75 L, so you add 21.25 L of water (5.61 gal). The wash weighs 27.25 kg, of which the sugar is22.0 °Bx, giving SG 1.092. Fermented fully dry to 0.990 that is a potential13.4 % ABV; stopped at 1.000 it would be 12.1 %.

Accuracy & limitations

  • The 0.625 L/kg figure is for refined sucrose dissolved in water; some references use 0.63. Brown sugar, raw sugar and dextrose differ slightly in density and moisture, so treat the last decimal as approximate and confirm with a hydrometer.
  • Potential ABV assumes the yeast ferments essentially all the sugar. Real washes often finish at 1.000–1.005 rather than 0.990, so the alcohol you actually get usually lands closer to the second figure shown.
  • Washes above about 25 °Bx stress most yeasts; above 40 °Bx fermentation is unreliable, so the calculator refuses results there. A stronger wash is not a shortcut — it is the usual cause of stalls and hot flavours.
  • Sugar provides no yeast nutrient at all. The calculation covers sugar, water and gravity only; nutrient, yeast choice and temperature decide whether the wash actually ferments.
  • Accepted ranges: 0.5–50 kg of sugar, 5–200 L total volume. Check local law on distilling; fermenting a wash and distilling it are regulated differently in many places.

FAQ

Does a sugar wash need yeast nutrient?

Yes — this is the one ingredient a sugar wash cannot do without. Sugar is pure carbohydrate: it contains no nitrogen, amino acids, vitamins or minerals, and yeast cannot build healthy cells from sugar alone. Without nutrient the fermentation typically slows or stalls and the yeast produces hydrogen sulphide (rotten-egg smell) and harsh fusel flavours. Add a proper yeast nutrient at the dose on its packet; folk substitutes like tomato paste or raisins supply some nitrogen but are inconsistent. Turbo yeasts are the exception — they already have nutrient blended in.

Should I use turbo yeast or baker's yeast?

They are bred for different jobs. Turbo yeast is selected for sugar washes: it ferments fast (often 2–5 days), tolerates 14–20 % alcohol, and includes its own nutrient — but pushed hard, especially in a warm room, it can taste hot and solventy. Baker's yeast and distiller's yeast ferment more slowly and more cleanly, with a practical ceiling around 12–14 %. If the wash is feedstock for a neutral spirit, turbo is convenient; if you want the cleanest possible ferment, use a wine or distiller's yeast with separate nutrient and keep the potential alcohol moderate.

Why did my sugar wash stall, and why does it taste hot?

The usual causes are a starting gravity that is too high (above about 25 °Bx the sugar itself stresses the yeast), no nutrient, and temperature swings. Sugar washes also acidify as they ferment, and a very low pH can stop yeast before the sugar runs out. A hot, harsh taste usually means the yeast was stressed — by heat, by a very strong wash, or by starvation — and produced fusel alcohols. Restarting a stuck wash works best by fixing the cause: check the pH, add nutrient, and if the gravity is extreme, dilute the wash and re-pitch fresh yeast rather than adding more sugar.

Is it legal to make and distil a sugar wash?

Fermenting a sugar wash and distilling it are regulated differently in many places. Fermenting sugar water for your own use is legal in much of the world, while distilling alcohol at home requires a licence or is prohibited in many countries and states, even in small amounts and even for personal use. This calculator only covers wash preparation — the sugar, water and gravity arithmetic. Check your local law before distilling anything.