IBU Calculator (Beer Bitterness)

Estimate beer bitterness in IBU from hop weight, alpha acids, boil time, gravity and batch size with the Tinseth formula.

Weight of this hop addition

Printed on the hop packet

Minutes this addition boils

Wort gravity, e.g. 1.050

Volume after the boil

How to use this calculator

  1. Enter the hop addition's weight (oz or g), its alpha-acid percentage (printed on the hop packet), how many minutes it boils, the wort's original gravity and the finished batch volume.
  2. The estimated IBU appears instantly, along with the calculated hop utilization.
  3. Use a dot or a comma as the decimal separator. Change the unit to convert the entered value.

What the inputs mean

Hop weight and alpha acids together give AAU — alpha-acid units (weight in oz × alpha-acid %). One ounce of 10 % AA hops is 10 AAU. This is the total bittering potential; the rest of the formula models how much of it ends up in the beer.

Boil time drives isomerization: the longer hops boil, the more alpha acids convert. Additions made after the boil (whirlpool, dry hop) are entered as 0 minutes and contribute 0 calculated IBU.

Original gravity penalizes utilization — see the FAQ below. Use the wort's gravity at the time the hops are boiled (for concentrated boils, this is the kettle gravity, not the diluted final gravity).

Batch volume is the finished volume after the boil, not the pre-boil kettle volume. More beer from the same hops means less bitterness per litre.

Formula

The Tinseth formula (Glenn Tinseth, 1990s) is the most widely used method in modern brewing software. Other methods exist — Rager and Garetz — but Tinseth is the standard used here:

Utilization = bigness factor × boil time factorBigness factor = 1.65 × 0.000125^(OG − 1)Boil time factor = (1 − e^(−0.04 × t)) ÷ 4.15IBU = utilization × AAU × 74.89 ÷ V_gal

where AAU = hop weight (oz) × alpha-acid %, t is boil time in minutes and V_gal is batch volume in US gallons.

Example

1 oz of 10 % AA hops boiled 60 minutes in a5-gallon batch at OG 1.050: utilization is 23.1 %, giving34.5 IBU. The same beer in metric units — 28 g in 20 L — comes out at about 32 IBU.

Accuracy & limitations

  • Tinseth is an empirical estimate, not a laboratory measurement. Expect ±20 % versus analyzed IBU, sometimes more.
  • Hop age and storage, pellets versus whole cones, boil vigor, and trub losses all shift the real value in ways the formula cannot model.
  • Post-boil additions (whirlpool, dry hop) contribute 0 calculated IBU. Enter 0 minutes for them; the calculator treats them exactly that way.
  • Accepted ranges: hop weight 0–16 oz (0–453 g), alpha acids 0–25 %, boil time 0–120 minutes, OG 1.000–1.120, batch volume 1–50 gal (3.79–189 L). Out-of-range values are rejected, not extrapolated.

FAQ

Tinseth, Rager or Garetz — which formula should I use?

All three estimate bitterness from the same inputs but disagree on utilization. Rager typically returns higher IBU for long-boiled additions and lower IBU for late additions; Garetz is the most conservative of the three. Tinseth is the most widely used method today and the default in nearly every modern brewing app, which is why this calculator uses it. Expect the other two to land within roughly ±20% of the Tinseth number.

Do dry hops add IBU?

Not as calculated IBU. Isomerization of alpha acids — the chemistry this formula models — only happens at boiling temperatures, so a 0-minute (dry hop) addition contributes 0 IBU here. Dry hopping still adds perceived bitterness and aroma compounds, and very large dry-hop charges can add measurable bitterness, but the Tinseth formula cannot model that.

Why does my calculated IBU differ from the brewery's label?

The label usually comes from a laboratory measurement of actual iso-alpha acids in the finished beer, while Tinseth is an estimate from recipe inputs. Real-world variables the formula cannot see — hop age and storage, pellets versus whole cones, boil vigor, and losses to trub and dry hops — move the real number, typically by 10–20% and sometimes more.

Why does high gravity lower hop utilization?

In the Tinseth model the bigness factor shrinks as original gravity rises: denser wort suppresses isomerization of alpha acids and drags more hop material out with the hot break. Practically, a 1.080 wort extracts noticeably less bitterness from the same hops than a 1.050 wort boiled for the same time.