Beer Calorie Calculator – Calories from OG & FG

Estimate the calories in a serving of beer from its original and final gravity, using the standard ASBC method — no lab needed, just the two readings you already take.

Before fermentation, e.g. 1.050

After fermentation, e.g. 1.010

How to use this calculator

  1. Enter the original gravity (OG) you measured before fermentation, in specific gravity (e.g. 1.050).
  2. Enter the final gravity (FG) after fermentation finished, from the same hydrometer.
  3. Pick the serving size you actually pour — a can, a bottle or a pint.
  4. Read the calories per serving, the calories per 100 mL for comparing beers, and the estimated ABV the same readings imply.

What the inputs mean

Original gravity measures how much extract — sugars and dextrins from the malt — was dissolved in the wort. Between OG and FG, yeast turns part of that extract into alcohol and CO₂. The difference between the two readings therefore holds both pieces of the calorie puzzle: how much alcohol was made, and how much extract was left behind.

Final gravity is trickier than it looks: alcohol is less dense than water, so the FG reading understates the extract still in the beer. The formula corrects for this by blending the original and apparent extract into the real extract — the figure that actually feeds the calorie count.

Apparent attenuation (shown with the result) is the share of the original extract that disappeared during fermentation: (OG − FG) ÷ (OG − 1). Typical beers attenuate 70–85 %. A high-attenuation beer is dry and alcohol-driven; a low-attenuation beer keeps more calories as residual extract.

Formula

Both gravities are first converted to degrees Plato with the same ASBC polynomial the Brix / Plato / SG converter uses, so the two calculators always agree. The original extract (OE) and apparent extract (AE) are then combined into the real extract (RE):

RE = 0.1808 × OE + 0.8192 × AE

Alcohol by weight (ABW) follows from the extract that disappeared:

ABW = (OE − RE) ÷ (2.0665 − 0.010665 × OE)

Calories combine the two energy sources and scale to the serving:

kcal = (6.9 × ABW + 4.0 × (RE − 0.1)) × FG × (serving mL ÷ 100)

The 6.9 factor is the energy in a gram of ethanol, 4.0 the energy in a gram of extract, and 0.1 corrects for ash. Multiplying by FG converts the per-100 g result into per 100 mL of beer. ABV is estimated with the same standard formula as the ABV calculator: (OG − FG) × 131.25.

Example

A pale ale brewed from OG 1.050 to FG 1.010 has an original extract of 12.4 °P and a real extract of 4.3 °P, giving 4.2 % alcohol by weight (5.25 % ABV, 80 % apparent attenuation). Poured as a355 mL (12 oz) serving it comes to about 164 kcal — 46 kcal per 100 mL, of which roughly two-thirds is the alcohol itself.

Accuracy & limitations

  • This is the standard ASBC estimation method, not a measurement. Laboratory values for the same beer commonly differ by a few percent, and more for unusual recipes.
  • The estimate covers alcohol and residual extract only. Beers with significant protein, glycerol, lactose or adjunct sugars still follow the same formula, but each extra component adds small errors.
  • Gravity readings carry the accuracy of your hydrometer: a 0.001 error in FG moves the result by roughly 1–2 kcal per serving. Measure at the hydrometer's calibration temperature or correct the reading first.
  • Fruit additions, blending and barrel ageing after fermentation change both alcohol and extract in ways two gravity readings cannot see.
  • Accepted ranges: OG 1.000–1.120, FG 0.990–1.050, and FG must be below OG — a beer cannot gain gravity while fermenting.

FAQ

Where do the calories in beer actually come from?

Mostly from the alcohol itself. Ethanol carries 6.9 kcal per gram, against 4.0 kcal per gram for the residual extract (unfermented sugars and dextrins) left in the beer. In a typical 5 % beer, roughly two-thirds of the calories come from alcohol and one-third from residual extract. That is why a strong beer is almost always a high-calorie beer, even when it finishes dry — and why a sweet, low-attenuation beer can carry more calories than its ABV alone suggests.

Can I use this number on a nutrition label?

No. This is an estimate calculated from two hydrometer readings, suitable for comparing your own recipes and batches. Commercial nutrition labelling has to be based on laboratory analysis of the finished product (or an approved calculation method where the regulations allow one), and the rules differ by country. If you sell beer, have a lab measure it — do not print a calculator result on the label.

Why does a low final gravity not always mean low calories?

Because the calories follow the alcohol, and a low FG usually means more of the extract was fermented into alcohol. A beer that starts at 1.060 and finishes at 1.010 has more alcohol — and usually more calories — than a beer that starts at 1.045 and finishes at 1.012, even though the second one tastes sweeter. Residual extract only becomes the bigger factor in low-attenuation styles such as sweet stouts or barleywines that finish high.

Can I enter refractometer readings instead of hydrometer readings?

Not directly. Once fermentation has started, the alcohol in the sample bends light differently and a raw refractometer reading overstates the gravity. Correct the current reading first with the refractometer correction calculator, then enter the corrected FG here together with your original gravity.