Brix, Plato and Specific Gravity Converter

Convert between degrees Brix, degrees Plato and specific gravity (SG) — the three ways brewers measure sugar in wort and must.

0–40 °Bx

0–40 °P

1.000–1.160 SG

How to use this converter

  1. Enter a value in any one of the three fields: degrees Brix, degrees Plato, or specific gravity.
  2. The other two values are calculated instantly.
  3. Use a dot or a comma as the decimal separator.

What the units mean

Degrees Brix (°Bx) and degrees Plato (°P) both express how much sugar is dissolved in a liquid, as a percentage of its weight. A reading of 12 °Bx means 12 grams of dissolved solids per 100 grams of liquid. Refractometers read in Brix; many European brewers work in Plato.

Specific gravity (SG) is the density of the liquid relative to water. Pure water reads 1.000; dissolved sugar makes the liquid denser, so a 12 °Bx wort reads about 1.048. Hydrometers read in SG.

Formulas

Brix to specific gravity (ASBC polynomial):

SG = 1 + B ÷ (258.6 − (B ÷ 258.2) × 227.1)

Specific gravity to Brix is the numerical inverse of the same formula (solved by bisection), so converting back and forth always round-trips exactly.

Plato and Brix are treated as equal:

°P = °Bx

Example

A wort reads 12 °Bx on the refractometer. The converter gives 12 °P andSG 1.048. Going the other way, an SG reading of 1.050 converts to12.4 °Bx.

Accuracy & limitations

  • The polynomials are empirical fits to sucrose solutions. They are accurate for wort and must; dissolved alcohol or large amounts of unfermentable solids shift the true relationship.
  • Never enter a refractometer reading taken after fermentation started without correcting it first — alcohol distorts the reading and the converted SG would be wrong.
  • Accepted ranges: 0–40 °Bx, 0–40 °P, SG 1.000–1.160. Out-of-range values are rejected, not extrapolated.

FAQ

Are Brix and Plato the same thing?

For brewing purposes, yes. Both measure dissolved solids — mostly sugar — as a percentage of the liquid's weight. Their definitions differ slightly in the laboratory, but every brewing reference and calculator treats them as interchangeable, and so does this converter.

Which formula does this converter use?

The standard ASBC polynomial used across brewing references: SG = 1 + B ÷ (258.6 − (B ÷ 258.2) × 227.1). The reverse direction is the numerical inverse of the same formula, so converting back and forth always round-trips. It covers the full brewing range from water (0 °Bx, SG 1.000) to strong worts.

Can I enter a refractometer reading from a finished beer?

Only if the reading was taken before fermentation started. Once yeast produces alcohol, the alcohol bends light differently and the raw refractometer reading no longer reflects sugar content — it must first be corrected with a dedicated refractometer correction before converting.

What range does this cover?

0–40 °Bx and °P, and SG 1.000–1.160. That covers water, typical worts and musts, and high-gravity brews. Values outside this range are rejected rather than extrapolated.