Proof vs ABV: What the Numbers on the Bottle Mean

A bourbon says 100 proof. A Scotch says 50% vol. They are the same strength — the numbers just come from different systems. Proof is a legacy scale that survives mainly on US labels, while ABV is the scientific standard used almost everywhere else. Confusing the two is easy, and the error is a factor of two.

US proof: exactly twice the ABV

In the United States, proof has meant exactly twice the alcohol by volume since 1848. The definition is written into federal law (27 CFR §5.37), and the Alcohol and Tobacco Tax and Trade Bureau requires proof or ABV on distilled-spirit labels. The conversion is one line:

US proof = 2 × ABV
ABV = US proof ÷ 2

So 40% ABV is 80 proof, 50% ABV is 100 proof, and pure ethanol at 100% ABV is 200 proof. Proof carries no information beyond ABV — it is the same measurement on a doubled scale, chosen in 1848 so that common spirits landed on round numbers.

UK proof: the old scale that was not a doubling

Britain ran a different system until 1980. It began as a gunpowder test: excise officers soaked gunpowder in spirit and tried to ignite it, and a spirit that kept the powder burning was “proved”. The test was later fixed to a density standard — a spirit whose density was 12/13 that of water at 51 °F — and that strength, about 57.15% ABV, became 100 degrees proof on the Sikes scale.

Imperial proof was therefore about 1.75 times the ABV, not double: a 40% ABV spirit was about 70° proof, and a 57.15% spirit was 100° proof. The UK abolished the scale under the Weights and Measures Act 1979, effective from 1980, and now labels spirits in % ABV like the rest of Europe. You will still meet UK proof in old recipes, historical documents, and one surviving name: navy-strength gin, at about 57% ABV, is 114 US proof — and almost exactly 100 in the old British system, which is where the name comes from.

ABV, US proof and UK proof side by side

ABV, US proof and historical UK proof compared
% ABVUS proofUK proof (historic)Typical of
408070°Standard vodka, gin, whisky
459079°Many bourbons and rye whiskeys
5010087.5°Bottled-in-bond US spirits
57.15114100°Navy-strength gin
75.5151132°Overproof rum
95190166°Rectified spirit

ABW: the other percentage

Some labels and older recipes express strength as alcohol by weight (ABW) instead of by volume. Because ethanol is lighter than water — 0.789 g/mL against water's 1.0 — ABW is always a lower number than ABV for the same drink, roughly ABW = ABV × 0.789. A 40% ABV spirit is about 31.6% ABW. US labels use ABV, so a proof-to-percent conversion assumes ABV throughout; if a figure is labelled ABW, convert it first or you will underestimate the strength.

Reading a label

FAQ

How do I convert proof to ABV?

For US proof, divide by two: 80 proof is 40% ABV and 100 proof is 50% ABV. The rule only holds for US proof — the historical British scale was different, and a label that says % vol or alc/vol already states the ABV directly.

Is 100 proof the same as 100% alcohol?

No. 100 US proof is 50% ABV. Pure ethanol is 200 proof. The doubled number is a historical convenience from 1848, not a percentage of anything.

Why did the UK stop using proof?

The UK replaced its proof scale with ABV under the Weights and Measures Act 1979, effective from 1980. ABV is a direct scientific measure — millilitres of ethanol per 100 mL at 20 °C — and it is the standard the EU and nearly every other country uses, so one number now works on labels worldwide.

What is ABW, and how does it relate to ABV?

ABW is alcohol by weight: the mass of ethanol per 100 units of mass. Because ethanol is lighter than water (0.789 g/mL), ABW is always a lower number than ABV for the same drink — roughly ABW = ABV x 0.789. A 40% ABV spirit is about 31.6% ABW.

Try the calculator

Convert any strength instantly with the ABV to proof calculator, or work out a drink's strength from gravity readings with the ABV calculator.