How to Measure Alcohol Content at Home

No home instrument measures “alcohol” directly. Each tool measures something else — density, or how light bends — and alcohol is worked out from that. Pick the wrong tool for the liquid in front of you and the number it gives is not just imprecise, it is meaningless. The choice comes down to one question: are you measuring a fermenting drink, or a finished spirit?

First, pick the right tool

Which instrument to use for each kind of drink
ToolMeasuresBest forFails when
HydrometerSpecific gravityFermenting beer, wine, cider, meadYou have no starting gravity
RefractometerSugar (Brix) by refractionSugar before fermentationAlcohol is present — needs correction
Alcoholmeter% ABV directlyFinished, clear spiritsSugar, flavouring or cloudiness is present

Hydrometer: two readings, one subtraction

A hydrometer floats in the liquid and reads its density as specific gravity. Before fermentation the wort or must is dense with sugar; as yeast turns sugar into alcohol, the liquid gets lighter. So you take two readings — the original gravity (OG) before fermentation and the final gravity (FG) after — and the drop between them is the alcohol:

ABV ≈ (OG − FG) × 131.25

For example, a beer with OG 1.050 and FG 1.010 is (1.050 − 1.010) × 131.25 = 5.25% ABV. The 131.25 factor is the standard approximation; the ABV calculator also shows the alternate formula for higher-gravity brews. Read the hydrometer at the bottom of the meniscus, spin it gently to shake off bubbles, and correct for temperature: most US brewing hydrometers are calibrated at 60 °F, many European ones at 20 °C. The hydrometer correction calculator does that correction for you.

Refractometer: great before fermentation, misleading after

A refractometer needs only a few drops: light bends as it passes through the liquid, and the bend tells you the sugar in degrees Brix. Before fermentation it is the fastest way to check a must or wort. But once alcohol is present, alcohol bends light too, so the reading becomes a mix of sugar and alcohol and the raw Brix number is wrong. The fix is the Terrill correction, which uses the original gravity and the current Brix to separate the two — that is what the refractometer correction calculator does. Most refractometers have automatic temperature compensation (ATC), but that only handles temperature, not alcohol.

Alcoholmeter: for finished spirits only

An alcoholmeter is a hydrometer graduated directly in % ABV. Float it in a tall cylinder of the spirit and read the strength straight off the scale — no second reading, no subtraction. It only works in a clean mixture of ethanol and water: sugar, flavouring, oils or cloudiness all change the density and push the reading off. And like every density instrument, it is graduated for one reference temperature, normally 20 °C: a warm sample reads high and a cold sample reads low, so correct the reading with the alcohol temperature correction calculator if the sample is not at 20 °C.

What does not work

FAQ

Can I measure ABV with just a refractometer after fermentation?

Not directly. Once alcohol is present, it bends light too, so the Brix reading is a mix of sugar and alcohol. With the original gravity and the current Brix, the Terrill correction separates the two — that is what the refractometer correction calculator does.

Why do I need two hydrometer readings?

One reading only tells you the density of the liquid now. ABV comes from how much sugar disappeared: the difference between the gravity before fermentation (OG) and after (FG) is what the yeast turned into alcohol.

My hydrometer reads 1.000 — is fermentation finished?

Probably near the end, but not certainly. Some wines finish below 1.000, and a stuck fermentation can also sit at 1.000. Take a second reading two or three days later: if it has not moved and the beer or wine tastes dry, it is done.

Can I use an alcoholmeter on wine or beer?

No. An alcoholmeter is a hydrometer graduated for clean ethanol and water only. Sugar and other dissolved solids change the density, so it reads far too high in wine, beer or liqueurs. Use a brewing hydrometer and the gravity readings instead.

Try the calculators

Work out the number with the ABV calculator (gravity readings), the refractometer correction calculator (Brix after fermentation), or the alcohol temperature correction calculator (alcoholmeter readings off 20 °C).