How to Dilute Alcohol to a Target Strength
Diluting — “proofing down” — is how cask-strength whisky becomes a 40% bottle, how 95% neutral spirit becomes a 40% vodka, and how a home distiller fixes an over-proof run. The arithmetic looks trivial, but the simple formula most sites print is wrong, and the error is big enough to notice at bottling strength.
Why the simple formula is wrong
The formula everyone quotes is the conservation of alcohol: the pure alcohol stays the same, so the water to add is the current volume times the strength ratio minus one.
Water to add = current volume × (current ABV ÷ target ABV − 1)That formula assumes volumes add up. They do not. Ethanol and water contract when mixed: the molecules pack together more tightly than they do apart, so 100 mL of ethanol plus 100 mL of water makes about 193 mL, not 200 mL. The naive formula therefore under-adds water, and the spirit comes out stronger than the target — about a percentage point over at typical proofing strengths.
A worked example: 95% down to 40%
Start with 1 litre of 95% ABV spirit and aim for 40% ABV. Conservation of alcohol fixes the final volume: 1 L × 95 ÷ 40 = 2.375 L. The question is only how much water gets you there.
| Method | Water to add | Final volume | Result |
|---|---|---|---|
| Naive formula | 1.375 L | 2.375 L (claimed) | About 68 mL short — spirit ends up over 40% |
| Exact (OIML R 22 density tables) | 1.4428 L | 2.375 L | 40% ABV |
The exact figure comes from density tables (OIML R 22), which account for contraction at each strength. The alcohol dilution calculator uses the same reference tables as the ABV Corrector app below 70 %vol and the OIML R 22 general formula above it, so it gives the exact water volume for any strength from 1 to 100 %vol.
Which water, and how to mix
- Use distilled or demineralised water. Tap water's minerals and chlorine can cloud the spirit and add flavour. For a bottle you care about, the water matters as much as the arithmetic.
- Measure the water, don't top up to a line. Because the mixture contracts, a volume mark on the vessel lies to you. Measure the water in a jug or weigh it: 1 mL of water is 1 g.
- Add gradually and stir. Pour the water in slowly, stir well, and let the mixture rest before the final check — alcohol and water stratify at first.
- Measure at 20 °C. Strength is defined at a reference temperature, so let the sample settle to 20 °C and verify it with an alcoholmeter. If the sample is warmer or colder, correct the reading first with the alcohol temperature correction calculator.
Common mistakes
- Trusting the naive formula. It is off by about 5% of the water volume at high strengths — 68 mL per litre in the 95% to 40% case.
- Diluting with tap water and wondering why a clear spirit turned cloudy.
- Measuring a warm sample. A warm alcoholmeter reading is too high, so you think the spirit is stronger than it is and over-dilute.
- Adding water to a liqueur or wine and expecting an alcoholmeter to agree. Sugar and dissolved solids change density, so an alcoholmeter only reads true in a clean ethanol–water mixture.
Diluting is not the same as blending: if you are mixing two spirits to reach a middle strength, rather than adding water, the Pearson square gives the proportions — see the spirit blending calculator.
FAQ
How much water do I add to dilute 95% alcohol to 40%?
For each litre of 95% spirit, add 1.4428 litres of water. The final volume is 2.375 litres at 40% ABV. The naive formula gives 1.375 litres, which is 68 mL short per litre.
Can I dilute alcohol with tap water?
You can, but distilled or demineralised water is better. The minerals and chlorine in tap water can cloud the spirit (louching) and change its flavour, especially in delicate spirits.
Why is the final volume less than the two volumes added together?
Ethanol and water contract when mixed: the molecules pack together more tightly than they do apart. 100 mL of ethanol plus 100 mL of water makes about 193 mL, not 200 mL. The final volume is always a little less than the sum of the parts.
Does diluting change the total amount of alcohol?
No. Dilution spreads the same pure alcohol over more liquid, so the strength falls but the total alcohol stays exactly the same. That is why the same bottle still contains the same number of standard drinks after proofing down.
Try the calculator
Enter your current volume, current strength and target strength in the alcohol dilution calculator to get the exact water to add and the final volume — no contraction error, no guessing.